CYLINDER HEAD/CYLINDER/PISTON
29
Reproduction or translation, even partial, is forbidden without the written consent of Peugeot Motocycles
CYLINDER HEAD/CYLINDER/PISTON
Removal of the pulsair reed valve
- Remove the cover (1) (3 screws).
- Remove the pulsair reed valve (2).
The paper gasket must be changed
each time it is removed.
Removal of the cylinder head
- Remove the pneumatic valve (1).
- Remove the volute (2) (6 screws).
-
Remove the cylinder cover. Right side. (3)
(4 screws).
- Disconnect the pipe from the pulsair reed
valve (2 nuts).
- Remove the rocker cover (4 screws).
Tightening torque: 10 Nm.
- Using a wrench, turn the crankshaft in the
direction of operation to as to line up the
marks on the camshaft gear (A) with the
cylinder head gasket face.
1
2
1
2
3
A
Summary of Contents for XS1P52QMI-4
Page 2: ......
