MAGNETO FLYWHEEL/FREEWHEEL
26
Reproduction or translation, even partial, is forbidden without the written consent of Peugeot Motocycles
Removal of the overrunning clutch
- Remove the flywheel magneto.
- Remove the 10 bolts that secure the RH
cover.
A. Screw Length: 30 mm.
B. Screw Length: 95 mm.
C. Screw Length: 100 mm.
- Remove the RH cover.
Tightening torque: 12 Nm.
.
- Remove the paper gasket (1) and the
2 locating pins (2).
- Remove the starter ring (3).
- Remove the starter dog (4).
- Using pin spanner ref. 752237, immobilise the
overrunning clutch (5).
The notched nut of the overrunning
clutch has a left-hand thread.
- Using tool P/N 800673, remove the notched
nut and the washer of the overruning clutch.
Tightening torque: 90 Nm.
- Remove the overrunning clutch.
A
A
C
C
B
B
B
1
3
2
2
4
752237
5
800673
Summary of Contents for XS1P52QMI-4
Page 2: ......
