SECONDARY TRANSMISSION
17
Reproduction or translation, even partial, is forbidden without the written consent of Peugeot Motocycles
SECONDARY TRANSMISSION
Removal of the secondary transmission
Remove the screw (A) in order to drain
the relay box.
Tightening torque: 10 Nm.
Use a drip pan to catch the transfer box
oil when the cover is removed.
- Remove the secondary transmission cover
(7 screws).
Tightening torque: 22 Nm.
- Remove the paper gasket (1) and the
2 locating pins (2).
- Remove the countershaft (3).
- Remove the secondary shaft (4).
Make a note of the way the secondary
shaft pinion is installed.
- The primary shaft can be drifted out of the
casing using a mallet (5).
A
1
2
2
4
3
5
Summary of Contents for XS1P52QMI-4
Page 2: ......
