CYLINDER HEAD/CYLINDER/PISTON
40
Reproduction or translation, even partial, is forbidden without the written consent of Peugeot Motocycles
- Fit the chain tensioner gasket.
- Install the chain tensioner and the
2 attachment screws (1).
Tightening torque: 10 Nm.
- Using a flat blade screwdriver, unlock the
chain tensioner screw.
- Fit the O-ring.
- Install the tensioner cap.
Tightening torque: 8 Nm.
Checking the timing
- Rotate the engine twice: 2 revolutions in the
engine's operating direction.
- Turn the magnetic wheel to line up the "T"
mark with the the crankcase boss (A).
- Make sure the camshaft marks (B) are parallel
with the gasket seat surface.
- If the marks are not alined, reset the valve
timing.
Installing the valve clearance
- Remove the rocker cover.
Tightening torque: 8 Nm.
- Using a wrench, turn the crankshaft in the
direction of operation to as to line up the
marks on the camshaft gear (B) with the
cylinder head gasket face.
.
1
A
B
B
Summary of Contents for XS1P52QMI-4
Page 2: ......
