PEUGEOT Django 125, Workshop Manual

Page: 14 / 83

TIGHTENING TORQUES
13
Reproduction or translation, even partial, is forbidden without the written consent of Peugeot Scooters
TIGHTENING TORQUES
Engine part
Body panels
Quantity Dimension
Tightening torque
125/151 cc
Spark plug 1 M10-1.5 10 to 12 Nm
Engine drain plug 1 M12 35 to 45 Nm
Screen 1 M30 10 to 20 Nm
Cylinder head
Nut Ø8 mm
Screw Ø6 mm 4
2 M8-1.25
M6-1.0
18 to 22 Nm
7 to 11 Nm
Cylinder head cover 4 M6-1.0 8 to 12 Nm
Camshaft gear 2 M6-1.0 10 to 15 Nm
Camshaft stopper plate 1 M6-1.0 10 to 15 Nm
Automatic tensioner 2 M5-0.8 7 to 11 Nm
Automatic tensioner plug 2 M6-1.0 8 to 12 Nm
Camshaft gear 1 M6-1.0 8 to 12 Nm
Chain tensioner 1 M6-1.0 8 to 12 Nm
Inlet manifold 2 M6-1.0 8 to 12 Nm
Cylinder casings 2 M6-1.0 8 to 12 Nm
RH casing cover 10 M6-1.0 7 to 11 Nm
Freewheel 1 M22 90 to 100 Nm
Oil pump 2 M6-1.0 8 to 12 Nm
Anti-splash plate 2 M6-1.0 8 to 12 Nm
Transmission cover 8 M6-1.0 8 to 12 Nm
Relay box cover 7 M8-1.25 26 to 30 Nm
Relay box drain plug 1 M8-1.25 10 to 15 Nm
Relay box filler cap 1 M8-1.25 10 to 15 Nm
Starter motor 2 M6-1.0 7 to 11 Nm
Rotor 1 M12 50 to 60 Nm
Turbine 4 M6-1.0 8 to 12 Nm
Stator 2 M6-1.0 8 to 12 Nm
Engine speed sensor 2 M5-0.8 4 to 6 Nm
Drive pulley 1 M12 55 to 60 Nm
Driven pulley 1 M12 50 to 60 Nm
Clutch plate and shoes 1 M28 55 to 60 Nm
Front mudguard 8 to 10 Nm
Handlebar cover 1 to 2 Nm
Front shield panels 1 to 2 Nm
Rear shield
1 to 2 Nm
Bottom panel
6 to 8 Nm
Floor panel 8 to 10 Nm
Saddle storage compartment 8 to 10 Nm
Rear body panels 1 to 2 Nm
Grab handle 20 to 25 Nm