STEERING/FORK
66
Reproduction or translation, even partial, is forbidden without the written consent of Peugeot Scooters
- Install the retaining ring (I).
- Fit a new, lightly greased dust cover (H).
- Pour 0.092 l SAE10W hydraulic oil into the fork
tube.
- Install the spring (C).
- Fit the fork tube cap (A).
Tightening torque: 28 Nm.
- Fit the fork tubes into the fork triple clamps.
- Fit and tighten the upper screws on the fork
tee (1).
Tightening torque: 28 Nm.
- Tighten the lower screws on the fork tee (2).
Tightening torque: 28 Nm.
H
I
A
C
2
A
1
