SERVICE OPERATIONS
38
Reproduction or translation, even partial, is forbidden without the written consent of Peugeot Scooters
Fitting the starter system
- Fit the washer (5) on the housing of the kick
starter drive piece.
- Fit the return spring (4), hook the longest buckle
on the cover's pin (A).
- Fit the starter gear sector (1) into the lubricated
bearing sleeve.
- Hook the second buckle (B) of the spring onto the
starter gear sector.
- Wind the spring so as to position the kick starter
sector on the stop (C) of the cover.
- Turn over the cover, fit the washer and the circlip
on the the gear sector spindle.
- Wind approximately 1/8th of a turn the gear
sector so as to place the kick starter drive
piece (2).
- Position the pin (6) on the kick starter drive piece
in the cover housing (D).
- Fit the paper gasket.
When re-installing, use a new gasket.
- Install the plate and the 7 screws.
Removal of the transmission air filter
- Remove the transmission air filter (1).
• 1 collar.
- Clean or change the filtering elment if
necessary (2).
1
C
A
4
B
5
2
D
6
1
2
