SERVICE OPERATIONS
46
Reproduction or translation, even partial, is forbidden without the written consent of Peugeot Scooters
Checking the valve clearance
- At the intake a 0.15 mm feeler gauge shouldn't
go.
- At the exhaust a 0.15 mm feeler gauge shouldn't
go.
- On the contrary, if the fealer gauge goes, reset
the clearances.
- Tighten the nock nut.
Tightening torque: 10 Nm.
Changing the fuel filter
- Remove the protective shoe.
• 3 screw.
- Using tool part number 755996 clamp the fuel
supply hose between the tank and the fuel pump.
- Disconnect the 2 fuel pipes (1).
- Remove the fuel filter.
When re-installing, respect the direction
of installation of the filter shown by the
arrow which indicates in which direction
the fuel flows.
1
1
755996
