PEUGEOT 208 2017, Handbook

Page: 98 / 304

96
Safety
Remove and stow the head restraint
before installing a child seat with backrest
on a passenger seat. Refit the head
restraint once the child seat has been
removed.
U: seat suitable for the installation of a
child seat secured using the seat belt
and universally approved for "rearward
facing" and/or "forward facing" use.
U(R): as for U , the vehicle seat must be
adjusted to the highest and fully back
position.
U*: as for U , straightening the backrest.
(a) Universal child seat: child seat that can
be installed in all vehicles using the seat
belt.
(b) Group 0: from birth to 10 kg. Infant car
seats and "car cots" cannot be installed
on the front passenger seat.
(c) Refer to the current legislation in your
country before installing your child on
this seat.
(d) To install a child seat at the rear,
rearward or forward facing, move the
front seat forward, then adjust the
backrest to an upright position to allow
enough room for the child seat and the
child's legs.
(e) When a "rearward facing" child seat is
installed in the front passenger seat, the
passenger airbag must be deactivated.
Otherwise, the child would risk being
seriously injured or killed if the airbag
were deployed.
When a "forward facing" child seat is
installed on the front passenger seat,
the passenger's airbag must remain
activated.
(f) A child seat with support leg must never
be installed on this passenger seat.