PEUGEOT 208 2017, Handbook

Page: 183 / 304

8
181
In the event of a breakdown
Towing Reconnecting the (+) terminal
F
Raise lever A fully.
F
Refit open clamp B on the (+) terminal.
F
Push clamp B fully down.
F
Lower lever A to lock clamp B .
Do not force the lever as locking will not
be possible if the clamp is not positioned
correctly; start the procedure again.
Following reconnection of the
battery
Following reconnection of the battery, switch on
the ignition and wait 1 minute before starting to
permit initialisation of the electronic systems. If
minor problems nevertheless persist following
this operation, contact a PEUGEOT dealer or a
qualified workshop.
Referring to the corresponding section, you
must yourself reinitialise (depending on
version):
- the remote control key,
- etc.
The Stop & Start system may not be
operational during the trip following the
first engine start.
In this case, the system will only be
available again after a continuous
period of immobilisation of the vehicle,
a period which depends on the exterior
temperature and the state of charge of the
battery (up to about 8 hours).
Procedure for having your vehicle towed or for
towing another vehicle using the towing eye.