PEUGEOT 208 2017, Handbook

Page: 138 / 304

136
Driving
Reinitialisation
The system must be reinitialised after any
adjustment to the pressures of one or more
tyres, and after changing one or more wheels.
Before reinitialising the system, ensure
that the pressures of the four tyres are
correct for the use of the vehicle and in
line with the recommendations on the tyre
pressure label.
The under-inflation alert can only be relied
on if the reinitialisation of the system has
been done with the pressures in the four
tyres correctly adjusted.
The under-inflation detection system
does not give a warning if a pressure is
incorrect at the time of reinitialisation.
Without touch screen
F
With the ignition on and the vehicle
stationary, press this button for about
3 seconds then release it, an audible signal
confirms the reinitialisation.
With touch screen
Snow chains
The system does not have to be
reinitialised after fitting or removing snow
chains.
Operating fault
The flashing and then fixed illumination of the
under-inflation warning lamp accompanied
by illumination of the Service warning lamp
indicates a fault with the system.
In this case, under-inflation monitoring of the
tyres is no longer assured.
Have the system checked by a PEUGEOT
dealer or a qualified workshop.
After carrying out any work on the system,
the pressures of the four tyres must be
checked and the system reinitialised.
Initialisation of the system is done with the
ignition on and the vehicle stationary.
The guide-me-home lighting can be
configured in the menu
Driving /
Vehicle .
The new pressure parameters saved are
treated as reference values by the system.