PEUGEOT 208 2017, Handbook

Page: 127 / 304

125
6
Driving
To register a speed higher than the previous
setting, there are two possibilities.
Without using the accelerator
- Press the SET +
button.
A short press increases the speed setting by
1 mph (km/h).
Pressing and holding increases the setting in
steps of 5 mph (km/h).
By using the accelerator
- Exceed the saved speed until
you reach the desired speed.
- Press the SET – or
SET + button.
To register a speed lower than the previous
setting:
- Press the SET –
button.
A short press decreases the setting by 1 mph
(km/h).
Pressing and holding decreases the setting in
steps of 5 mph (km/h).
Switching the system off
- Place the thumbwheel at the 0 position:
cruise control mode is deselected. The
display returns to the total mileage recorder.
After switching off the ignition, all registered
speed settings are lost.
Operating fault
The registered speed is erased, then replaced
by three dashes.
Have it checked by a PEUGEOT dealer or a
qualified workshop.
Changing the registered
speed setting