PEUGEOT 208 2017, Handbook

Page: 115 / 304

113
6
Driving
Manual mode
This mode allows manual sequential gear
changing.
F
Move the selector lever to M .
F
Push the lever forward to change
up.
F
Pull the lever back to change
down.
Steering mounted control paddles
F
Pull the "+" paddle to change up.
F
Pull the "-" paddle to change up.
The gear engaged is indicated in the display.
Creep function
Depending on the engine, the vehicle moves
without pressing the accelerator.
Assistance with low-speed
manoeuvres
With the engine running at idle, parking brake
released and the lever placed at
A , M or R , the
vehicle moves off when your release the brake
pedal.
It stops on opening the driver's door. Closing
the door, and putting your foot on the brake
or accelerator pedal allows movement of the
vehicle again.
Following disconnection of the battery, you
have to reinitialise the gearbox.
F
Switch on the ignition.
AUTO and – appear in the
instrument panel.
F
Select position N .
F
Press the brake pedal firmly.
F
Wait around 30 seconds until N or a gear
appears in the instrument panel.
F
Release the brake pedal.
The gearbox is operational again.
With the ignition on, if this warning
lamp comes on and
AUTO flashes,
accompanied by an audible signal
and a message in the screen, this
indicates a gearbox fault.
Have it checked by a PEUGEOT dealer or a
qualified workshop.