PEUGEOT 208 2017, Handbook

Page: 159 / 304

8
157
In the event of a breakdown
Running out of fuel
(Diesel)
On vehicles fitted with Diesel engines, the fuel
system must be primed if you run out of fuel.
For all versions other than BlueHDi, refer to the
corresponding engine compartment view.
For more information on Diesel misfuel
prevention , refer to the corresponding
section.
1.6 BlueHDi engine
(Euro 6.1)
F
Fill the fuel tank with at least 5 litres of
Diesel.
F
Switch on the ignition (without starting the
engine).
F
Wait around 6 seconds and switch off the
ignition.
F
Repeat the operation 10 times.
F
Operate the starter to run the engine.
1.5 BlueHDi (Euro 6.2)
engine Warning triangle
Before leaving your vehicle to set up and
install the triangle, switch on the hazard
warning lamps and put on your high
visibility vest.
Refer to the manufacturer's instructions on
using the triangle.
Placing the triangle on the road
F
Place the triangle behind the vehicle, as
required by the legislation in force in your
country.
The triangle is available as an accessory;
contact a PEUGEOT dealer or a qualified
workshop.
If the engine does not start first time, do
not keep trying but start the procedure
again from the beginning.
F
Fill the fuel tank with at least 5 litres of
Diesel.
F
Switch on the ignition (without starting the
engine).
F
Wait around 1 minute and switch off the
ignition.
F
Operate the starter to run the engine.
If the engine does not start, repeat the
procedure.
Other engines
F
Fill the fuel tank with at least five litres of
Diesel.
F
Open the bonnet.
F
If necessary, unclip the cover to access the
priming pump.
F
Operate the priming pump repeatedly until
resistance is felt (there may be resistance at
the first press).