PEUGEOT 208 2017, Handbook

Page: 163 / 304

8
161
In the event of a breakdown
F
Check that the compressor switch is at the
" O " position.
F
Uncoil fully the electric cable, stowed under
the compressor.
F
Switch on the compressor by moving the
switch to the position " I " and adjust the
pressure as shown on the vehicle tyre
pressure label. To deflate: press the black
button on the compressor hose by the valve
connector.
F
Once the correct pressure is reached, put
the switch to the " O " position.
F
Remove the kit then stow it.
F
Connect the compressor's electric plug to
the vehicle's 12 V socket.
F
Switch on the ignition.
Should the pressure of one or more tyres
be adjusted, it is necessary to reinitialise
the under-inflation detection system.
For more information on
Under-inflation
detection , refer to the corresponding
section.
The tyre inflation pressures are given on
this label.