Perrot Greenkeeper Feedback, User Manual

Page: 140 / 143

User Manual
Bed ‐ GK 1+2e Rev. 03.04.2019 Page 140 / 143
Code:040 ‐ Version conflict of VCU program "%s"
The PC program does not match the program in the VCU. Remove the program from the VCU and
run Program test. Then download the program to the VCU.
Code:041 ‐ VCU program "%s" do not exist on PC
The PC program has been deleted. Remove the program from the VCU. Check whether Program
test was run.
Code:042 ‐ Max number of manual programs in VCU
The limit of max. 8 manual programs have been exceed. Delete the manual programs you no
longer need from the VCU. Max. 12 single valves ‐ sectors programs and
max. 8 manual programs.
Code:043 ‐ Max number of programs in VCU
The limit of max. 20 programs in the VCU have been exceed. Delete the programs you no longer
need from the VCU. Max. 12 single valves ‐ sectors programs and
max. 8 manual programs.
Code:044 ‐ "%s" invalid program
Code:045 ‐ "%s" invalid start time
Code:046 ‐ "%s" invalid correction
Code:047 ‐ Program is running
Code:048 ‐ "%s" Overlap time
The start time entered causes overlapping. As a rule a delay of 10 minutes must be maintained
between the stop time and start time of two programs.
Code:049 ‐ "%s" Overlap correction
Correction causes overlapping. Change the correction setting.
Code:050 ‐ The irrigation state is not inactive, reset irrigation
Code:051 ‐ Downloading is active
For your information only
Code:052 ‐ Loading image error
The graphic file you setup is no more available on your PC. Either copy the graphic file into the
directory or select another graphic file.
Code:053 ‐ No report
For your information only. No reports are available.