If the display is in sleep mode when an error occurs, the screen
will turn on for five minutes. The error will beep for one second
per minute until the error is cleared. If the error is not cleared
after five minutes, the screen will switch to power saving mode
and display the Error Alert button as a screen saver.
See TROUBLESHOOTING for more information about error
conditions.
USB Connection for Field Programming
The XTRI features a USB port that allows you to connect a PC
to the control for field programming and diagnostic parameter
download.
NOTE: Field Programmer software is required for field
programming features. See XTRI Field Programmer
Manual for more information on using the Field
Programmer software.
Pressing on the Format screen displays the USB screen.
Figure 29 USB Screen
When the USB screen appears, connect a USB cable to the
USB port on the control circuit board. Connect the other
end of the USB cable to a PC with the Field Programmer
software installed and follow the directions in the XTRI Field
Programmer manual to complete the connection. Press to
return to Master Settings.
NOTE: Do not remove USB cable from computer or control
while connected and transferring data. See the XTRI
Field Programmer manual for proper disconnection
procedure.
16 •
FLECK
5800/5810/5812 XTRI Service Manual
Summary of Contents for FLECK 5800
Page 1: ...FLECK 5800 5810 5812 XTRI CONNECTED XTR2 SERVICE MANUAL pentair com...
Page 36: ...WATER CONDITIONER FLOW DIAGRAMS 5810 Upflow 36 FLECK 5800 5810 5812 XTRI Service Manual...
Page 37: ...WATER CONDITIONER FLOW DIAGRAMS 5810 Downflow FLECK 5800 5810 5812 XTRI Service Manual 37...
Page 44: ...INJECTOR FLOW DATA TR18755 REV B 44 FLECK 5800 5810 5812 XTRI Service Manual...
