Cerberus ADSL2+ Wi-Fi (P 6331-5)
36
Application / NAT Services
If the user has more than one public IP address assigned by the ISP, these additional IP
addresses can be used to map to servers on the LAN. One public IP address will be used to
provide Internet access to the LAN computers via NAT, serving as the primary IP address of
the router. The rest will be mapped to servers on the LAN.
Name
– Name that will be displayed in the list below.
Type
– Router supports three NAT mapping types:
•
One to One
– One LAN IP address is mapped to one public IP address.
•
Many to Many
– Multiple local IP addresses are mapped to shared public IP addresses.
•
Server
– Specify inside servers of different services behind the NAT to be accessible to
the outside world.
LAN IP
– IP address of host in local network.
Subnet LAN IP
– Available only for Many to Many. Specify subnet of LAN IP addresses
Start Public IP
– Public IP address for One to One or Server mapping. Starting public IP
address for Many to Many mapping.
End Public IP
– Ending public IP address for Many to Many mapping.
Connection
– WAN connection which will be used for this NAT mapping.
Summary of Contents for Cerberus ADSL2+ Lite
Page 4: ......
