Cerberus ADSL2+ Wi-Fi (P 6331-5)
21
Quick Start
User ID
– Enter your username for your PPPoE/PPPoA connection.
Password
– Enter your password for your PPPoE/PPPoA connection.
Protocol
– Select your encapsulation and multiplexing type from the dropdown list.
VPI
– Virtual Path Identifier. The valid range for the VPI is 0 to 255.
VCI
– Virtual Channel Identifier. The valid range for the VCI is 1 to 65635 (0 to 31 is reserved
for local management of ATM traffic).
Connect
– Establish connection using above parameters.
LAN configuration
IP Address
– The default IP address of the router (as shown) is 192.168.1.1.
Netmask
– The default subnet mask of your router is 255.255.255.0. This subnet allows the
router to support 254 users. If you want to support a larger number of users you can change
the subnet mask.
Default Gateway
– The default gateway is the routing device used to forward all traffic that is
not addressed to a station within the local subnet. Your ISP provides you with the IP address
of the default gateway.
Host Name
– The host name is used in conjunction with the domain name to uniquely identify
the router. It can be any alphanumeric word that does not contain spaces.
Summary of Contents for Cerberus ADSL2+ Lite
Page 4: ......
