Cerberus ADSL2+ Wi-Fi (P 6331-5)
75
Frequent loss of ADSL line sync (disconnections):
1.
The ISP provides the WAN IP address after authenticating you. Authentication may be
through the user name and password, the MAC address or the host name;
2.
The username and password apply to PPPoE and PPPoA encapsulation only. Make sure
that you have entered the correct
Service Type
,
User Name
and
Password
(be sure to
use the correct casing).
Problems with the Internet Access
I cannot access the Internet:
1.
Make sure the router is turned on and connected to the network;
2.
If the ADSL LED is off, refer to Section
ADSL LED
of this troubleshooting;
3.
Verify your WAN settings;
4.
Make sure you entered the correct user name and password;
5.
For wireless stations, check that both the router and wireless station(s) are using the
same ESSID, channel and WEP keys (if WEP encryption is activated).
Internet connection disconnects:
1.
If you use PPPoA or PPPoE encapsulation, check the idle time-out setting;
2.
Contact your ISP.
If you have any troubles to configure or setup this ADSL Ethernet Router, please feel free to
contact us.
Summary of Contents for Cerberus ADSL2+ Lite
Page 4: ......
