Cerberus ADSL2+ Wi-Fi (P 6331-5)
56
Wireless Tab
Wireless Tab allows you to configure the wireless settings.
Setup
The default SSID is yournetworkname. SSID is wireless network name for the wireless router.
Your wireless client needs this name to establish wireless connection. The wireless setup
allows the user to enable or disable the Access Point (AP). Disabling Access Point will prevent
the wireless router from emitting any wireless signal.
Enable AP
– If checked, router will act as wireless access point.
Primary SSID
– The SSID is a unique name to identify the router in the Wireless LAN.
Wireless clients associating to the router must have the same SSID.
Hidden SSID
– Check this box to hide the SSID such that a station can not obtain the SSID
through passive scanning. Uncheck to make the SSID visible so a station can obtain the SSID
through passive scanning.
Channel B/G
– Select channel used by router to create wireless network.
802.11 Mode
– Select standard needed to connect to this wireless network:
Mixed
(B/G),
B
only
,
B+
or
G only
.
User Isolation
– Select this checkbox if you want to disable traffic between wireless hosts.
QoS Support
– Select this checkbox if you want to apply QoS rules for wireless connection.
Summary of Contents for Cerberus ADSL2+ Lite
Page 4: ......
