Cerberus ADSL2+ Wi-Fi (P 6331-5)
30
Assign ISPDNS, SNTP
– If enabled the router will advertise its own IP address as the
DNS server, when disabled the router will provide the DNS that was received from the
WAN.
Start IP
/
End IP
– Enter the starting/ending IP address which will be assigned to devices
using DHCP
Lease Time
– The Lease Time is the amount of time that a network user is allowed to
maintain a network connection to the router using the current dynamic IP address. At the
end of the Lease Time, the lease is either renewed or the DHCP server issues a new IP.
The amount of time is in units of seconds. The default value is 3600 seconds (1 hour).
The maximum value is 999999 seconds (About 278 hours).
Enable DHCP Relay
– In addition to the DHCP server feature, the router supports the
DHCP relay function. When the router is configured as DHCP server, it assigns the IP
addresses to the LAN clients. When the gateway is configured as DHCP relay, it is
responsible for forwarding the requests and responses negotiated between the DHCP
clients and the server.
Relay IP
– The IP address of the DHCP relay server.
Server and Relay Off
– When the DHCP server and relay functions are turned off, the
network administrator must carefully configure the IP address, Subnet Mask, and DNS
settings of every host on your network. Do not assign the same IP address to more than
one host. Also, your router must reside on the same subnet as all the other hosts.
LAN / LAN Clients
LAN Clients allows you to view and add computers in a LAN group. Each computer either has
a dynamic or static (manually-configured) IP address. You can add a static IP address
(belonging to the router’s LAN subnet) using the LAN Clients page. Any existing static entry
falling within the DHCP server's range can be deleted.
Select LAN Connection
– Select LAN Group you want to edit.
Enter IP Address
/
Hostname
/
MAC Address
– Fill out this fields and click
Apply
to add
specific host to Static Addresses list.
Static Addresses
– List of all hosts which will obtain always the same IP address from DHCP
server – this addresses won’t be assigned to other hosts. Select
Delete
checkbox and click
Apply
to delete selected host from Static Addresses list. During next connection this host will
obtain new dynamic IP Address.
Dynamic Addresses
– List of all host which obtained IP address from router’s DHCP server.
Select
Reserve
checkbox and click
Apply
to move selected host to Static Addresses list.
Summary of Contents for Cerberus ADSL2+ Lite
Page 4: ......
