Cerberus ADSL2+ Wi-Fi (P 6331-5)
74
5.
Your computer’s and the router’s IP addresses must be on the same subnet for LAN
access;
6.
If you changed the router’s LAN IP address, then enter the new one as the URL;
7.
Remove any filters in LAN or WAN that block web service.
The web Interface does not display properly:
1.
Make sure you are using Internet Explorer 5.0 (or compatible) and later versions;
2.
Delete the temporary web files and log in again.
Problems with the Login Username and Password
I forgot my login username and/or password:
1.
The default username is “
admin
”. The default password is “
trendchip
”. The Password
and Username fields are case-sensitive. Make sure that you enter the correct password
and username using the proper casing;
2.
Press the DEFAULT button for five seconds, and then release it. When the ADSL LED
begins to blink, the defaults have been restored and the router restarts;
Problems with LAN Interface
I cannot access the router from the LAN or ping any computer on the LAN:
1.
Check the Ethernet LEDs on the front panel. A LAN LED should be on for a port that has
a PC connected. If it is off, check the cables between your router and the PC. Make sure
you have uninstalled any software firewall for troubleshooting;
2.
Make sure that the IP address and the subnet mask is consistent between the router and
the workstation.
Problems with WAN Interface
Initialization of the ADSL connection failed:
1.
Check the cable connections between the ADSL port and the wall jack. The ADSL LED
on the front panel of the router should be on;
2.
Check that your VPI, VCI, type of encapsulation and type of multiplexing settings are the
same as what you collected from your telephone company and ISP;
3.
Restart the router. If you still have problems, you may need to verify your VPI, VCI, type
of encapsulation and type of multiplexing settings with the telephone company and ISP.
I cannot get a WAN IP address from the ISP:
1.
Ensure that all other devices connected to the same telephone line as your router (e.g.
telephones, fax machines, analogue modems) have a line filter connected between them
and the wall socket (unless your are using a Central Splitter or Central Filter installed by
the qualified and licensed electrician), and ensure that all line filters are correctly installed
and right way around;
2.
Missing line filters or line filters installed the wrong way around can cause problems with
your ADSL connection, including causing frequent disconnects.
Summary of Contents for Cerberus ADSL2+ Lite
Page 4: ......
