Cerberus ADSL2+ Wi-Fi (P 6331-5)
6
•
Dynamic Host Configuration Protocol (DHCP) Client and Server: On a WAN site, the
DHCP client obtains an IP address from the Internet Service Provider (ISP) automatically.
On a LAN site, the DHCP server allocates a range of client IP addresses, including
subnet masks and DNS IP addresses and distributes them to local computers. This
provides an easy way to manage the local IP network.
•
Static and RIP1/2 Routing: An easy static routing table or RIP1/2 routing protocol
supports routing capability.
•
SNMP (Simple Network Management Protocol): SNMP allows convenient remote
management of the router.
•
Web-based GUI: A web-based GUI offers easy configuration and management. User-
friendly and with on-line help, it also supports remote management capability for remote
users to configure and manage this product.
•
Firmware Upgradeable: You can upgrade the router with the latest firmware through its
web-based GUI.
•
High Speed Internet Access: downstream rates of up to 24Mbps and upstream rates of
up to 1Mbps. Cerberus ADSL2+ Wi-Fi is compliant with the following standards:
ANSI T1.413 issue 2,
ITU-T G.992.1 (G.dmt),
ITU-T G.992.2 (G.lite),
ITU-T G.992.3 (ADSL2 G.dmt.bis),
ITU-T G.992.5 (ADSL2+),
Reach Extended ADSL (RE ADSL).
•
Multi-Protocol to Establish a Connection: The router supports following protocols to
establish a connection with an ISP:
PPPoA (PPP over ATM Adaptation Layer 5 – RFC 2364),
PPPoE (PPP over Ethernet – RFC 2516)
RFC 1483/2684 encapsulation over ATM (bridged or routed),
CLIP (RFC 2225, previously IPoA – RFC 1577)
The router also supports VC-based and LLC-based multiplexing.
Package Contents
1.
PENTAGRAM Cerberus ADSL2+ Wi-Fi
2.
Power adapter 9 V, 1 A
3.
Ethernet cable (RJ-45)
4.
Telephone cable (RJ-11)
5.
CD
6.
Quick Installation Guide
Summary of Contents for Cerberus ADSL2+ Lite
Page 4: ......
