Pennsylvania Scale Company 7600 Operation Manual Download Page 42 | Manualshive

Page: 42 / 53

background image

42

Model 7600 40 Piece Weight Storage and Recall

This version 7600 is designed to allow storage and recall of up to 40 piece weights with a 6 digit
numeric ID.

NOTE: For this model the 2

nd

Base option is not available.

Operating Instructions:

Store Piece Weights Using Sample:

1. Select the unit of measure to establish the piece weight in by pressing the UNITS button

to cycle through the primary and secondary-weighing units. Default is LBS for primary,
KG for secondary.

2. Press the SAMPLE button repeatedly, until the desired sample size is displayed OR use

the numeric keypad to enter a unique sample size. Place the sample on the scale all at
once. The scale will determine the piece weight and enter count mode.

3. Press the STORE/8 button and enter the ID number for this piece weight. The scale will

alternately display ID and the last ID number used. Key in the new ID Number and
ENTER. The scale will now display the piece weight established through sampling in
step 2. To use this piece weight press the ENTER button.

4. The piece Weight is now stored in memory and may be recalled.

Store A Manually Entered Piece Weight:

1. Select the unit of measure to establish the piece weight in by pressing the UNITS button

to cycle through the primary and secondary-weighing units. Default is LBS for primary,
KG for secondary.

2. Press the PIECE WEIGHT Button, key in the piece weight and press the ENTER button.
3. Press the STORE/8 button and enter the ID number for this piece weight. The scale will

alternately display ID and the last ID number used. Key in the new ID Number and
ENTER. The scale will now display the piece weight manually entered in step 2. To use
this piece weight press the ENTER button.

4. The piece Weight is now stored in memory and may be recalled.

Recall A Piece Weight:

1. Press the ID/5 button, key the ID number and press the ENTER. The display will flash

RECALL then go into count mode using the piece weight that was previously stored.

2. If an ID number is entered that is not stored in memory the display will flash NOT

FOUND and return to normal weighing or counting mode.

To Clear A Piece Weight:

1. Press the STORE/8 button, key the ID number and press the ENTER. The display will

flash PC and the Piece Weight in memory. Press the “.“ (decimal) button and ENTER.
The Piece Weight and ID number is now removed from the scale memory.

Note:

For this Model the part ID functions as described above. For more information on

other 7600 scale functions please refer to the 7600 Operators Manual.

«
...
40
41
42
43
44
...
»

Summary of Contents for 7600






















































Reviews:

No comments

Related manuals for 7600

Brand: e-tarti Pages: 15

Brand: Taylor Pages: 12

Brand: Tanita Pages: 40

Brand: U-Line Pages: 12

Brand: Microlife Pages: 32

Brand: Sencor Pages: 10

Brand: Valor Pages: 40

Brand: Magio Pages: 13

Brand: AWS Pages: 5

Brand: OHAUS Pages: 77

Brand: OHAUS Pages: 64

Brand: OHAUS Pages: 32

Brand: Silvercrest Pages: 59

Brand: Balance Pages: 100

TKG EKS 1006 COL

Brand: Team Kalorik Pages: 32

Brand: Cardinal Pages: 4

Brand: Cardinal Pages: 8

Brand: Cardinal Pages: 22

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands