manualshive.com logo in svg

Pennsylvania Scale Company 7600, Operation Manual, Page: 10 / 53

Share
Download
Pennsylvania Scale Company 7600 Operation Manual Download Page 10

 

Last printed 9/3/2002   

 

 

10

./CLEAR Button

  -  Used when the scale is in one of the data entry modes. Pressing this                                     

button once will put a decimal point onto the display and pressing it a second time will clear the 
display. 

ENT Button

  -  Used when the scale is in one of the data entry modes. Button is used to                              

enter information into the system memory. 
 

WEIGHING

 

WEIGHING WITHOUT TARE

 

1.  If the second base option has been installed, press the BASE button to select base 1 or 

base 2. When base 2 is selected the base 2 LED will be lit. When base one is selected the 
base 2 LED will be out. If base 2 has been locked out during calibration, the word "Error" 
will momentarily show on the display. 

2.  Press the UNITS button to select either the Primary weighing unit or the secondary 

weighing unit. (Associated indicator will be lit.) 

3.  Verify that the "GROSS"  indicator is lit. If not, press the GROSS/NET button to light 

this indicator and put the scale into the gross weight mode. 

4.  Establish a base zero by pressing ZERO with nothing on the scale platform to clear any 

existing weight readings. 

5.  Place the item(s) to be weighed on the platform and read the weight on the display. 

NOTE

:   

If very light items (less then 1/4 of the display resolution) are placed on the 
platform individually, the weight may be zeroed off by the AZT feature.  Add 
light items to the platform simultaneously.

 

 

WEIGHING WITH TARE

 

1.  If the second base option has been installed, press the BASE button to select base 1 or 

base 2. When base 2 is selected the "base 2" LED will be lit. When base one is selected 
the base 2 LED will be out. If base two has been locked out during calibration, the word 
"Error" will momentarily show on the display. 

2.  Press the UNITS button to select either the Primary or the Secondary weighing unit. 

(Associated indicator will be lit.) 

3.  Press the ZERO button with nothing on the platform to establish a base zero. 
4.  A tare weight may be acquired using one of the following methods: 

a.  Place the container or object to be tared off on the platform and press TARE; or 
b.  Press the KEYPAD TARE button and then key in the weight of the container or 

object, and press ENT. 

5.  The net weight value will be displayed on the weight display and the NET indicator will 

be lit. 

6.  Pressing  the GROSS/NET button will toggle between gross weight and net weight.  
7.  When a tare value is stored in the system, the TARE indicator will be illuminated. 
8.  Place the objects to be weighed in the container and read the net weight on the display.  

To clear a tare value, remove all weight from the scale and press TARE, or press 
KEYPAD TARE, key in 0 and press ENT. 

NOTE:  

IF the tare has been acquired using the TARE button, the tare value may be 
viewed by pressing KEYPAD TARE. Pres ENT to return to the weight 
display without altering the tare weight.

 

Summary of Contents for 7600






















































Reviews:

No comments