Penguin Computing Relion 1900e, Technical Manual

Page: 106 / 174

Relion 1900e/2900e Manual
91 Revision 1.3
10. On-board Connector/Header Overview
This section identifies the location and pin-out for on-board connectors and headers of the server board that
provide an interface to system options/features, on-board platform management, or other user accessible
options/features.
10.1 Power Connectors
The server board includes several power connectors that are used to provide DC power to various devices.
10.1.1 Main Power
Main server board power is supplied from two slot connectors, which allow for one or two (redundant) power
supplies to dock directly to the server board. Each connector is labeled as “MAIN PWR 1” or “MAIN PWR 2”
on the server board. The server board provides no option to support power supplies with cable harnesses.
In a redundant power supply configuration, a failed power supply module is hot-swappable. The following
tables provide the pin-out for both “MAIN PWR 1” and “MAIN PWR 2” connectors.
Table 26. Main Power (Slot 1) Connector Pin-out (“MAIN PWR 1”)
Signal Name Pin # Pin# Signal Name
GROUND B1 A1 GROUND
GROUND B2 A2 GROUND
GROUND B3 A3 GROUND
GROUND B4 A4 GROUND
GROUND B5 A5 GROUND
GROUND B6 A6 GROUND
GROUND B7 A7 GROUND
GROUND B8 A8 GROUND
GROUND B9 A9 GROUND
P12V B10 A10 P12V
P12V B11 A11 P12V
P12V B12 A12 P12V
P12V B13 A13 P12V
P12V B14 A14 P12V
P12V B15 A15 P12V
P12V B16 A16 P12V
P12V B17 A17 P12V
P12V B18 A18 P12V
P3V3_AUX: PD_PS1_FRU_A0 B19 A19 SMB_PMBUS_DATA_R
P3V3_AUX: PD_PS1_FRU_A1 B20 A20 SMB_PMBUS_CLK_R
P12V_STBY B21 A21
FM_PS_EN_PSU_N
FM_PS_CR1 B22 A22 IRQ_SML1_PMBUS_ALERTR2_N
P12V_SHARE B23 A23 ISENSE_P12V_SENSE_RTN
TP_1_B24 B24 A24 ISENSE_P12V_SENSE
FM_PS_COMPATIBILITY_BUS B25 A25 PWRGD_PS_PWROK