Touch io Instruction Manual
8. Prepare to mount the
touch io
reader by feeding the wire bundle slack inside the wall so it is concealed
and out of the way. The
touch io
reader must be mounted securely and flush against the surface.
9. Snap the reader into the clear bracket’s upper and lower mounting stubs (with the LED illumination ring
at the top end of the reader). Position the reader’s bottom hole to align with the bracket’s bottom screw
mount stub. Insert and secure the screw into the bottom of the reader to fasten it to the bracket’s
mounting stub.
With the
touch io
reader securely mounted, the power supply and backup battery can be energized.
NOTE
: A backup battery is HIGHLY recommended to prevent system failure in the event of an AC power
loss.
When first powered up, the reader’s LED ring initially illuminates white (during boot up) and then to its
default yellow color.
Need additional information about any of the following?
If you have any questions or need help with installation or with any of the hardware described in this manual,
please feel free to contact the ProdataKey
staff.
Page 29
