Touch io Instruction Manual
NOTE
: There may be some degree of pulling and pushing on the wires during the reader install process.
Crimp each B connector
three times
to ensure the wire pairs are held securely in the wire splice
and will not disconnect. After all wires are paired and crimped, wrap the wire bundle securely
with electrical tape around the B connectors so they remain together and for ease when
pulling/pushing the bundle through the wall.
In addition to the colored wires extending from the
touch io
, the thicker, coated antenna wire
separate from the wire bundle, with the brass fitting at the end (the MCX cable), is to be
attached to the back of the
.
Page 23
