MicroTrans
EQ
Operation & Maintenance Manual
Paragon Controls Incorporated
25
Revision Level 012
8.10.2. Alarm Values
The Alarm Value Menu allows the user to enter the Low or the High flow or pressure alarm value.
Alarm values will be displayed in the same engineering units selected in the Eng. Units Menu (see
Section 8.3).
-
High Alarm Function:
The High Alarm activates if the flow or pressure exceeds the High
Alarm value and resets when the flow or pressure drops below the High Alarm Value.
-
Low Alarm Function:
The Low Alarm activates if the flow or pressure drops below the Low
Alarm Value and resets when the flow or pressure exceeds the Low Alarm Value.
Field
Setup
Menu
Output Filter
Alarm Status
Lo Alarm Value
Alarm Options
Alarm Value
(000,000)
DP Display Format
Alarm Delay
Hi Alarm Value
Factory Defaults
(100,000)
8.10.3. Alarm Delay
The Alarm Delay Menu allows the user to enter an alarm delay of 0 to 999 seconds before an alarm will
be activated. The alarm will be reset without a delay.
Field
Setup
Menu
Output Filter
Alarm Status
Lo Alarm Delay
Alarm Options
Alarm Value
(000)Seconds
DP Display Format
Alarm Delay
Hi Alarm Delay
Factory Defaults
(000)Seconds
8.11. DP DISPLAY FORMAT
The DP Display Format Menu is only available when the MicroTrans
EQ
is configured by Paragon at the
time of order for pressure; it allows the user to change the number of digits shown to the right of the
decimal point. Selections are 0 to 4 digits. Use the UP/DOWN keys to move the decimal point to the
left or right.
Field Setup
Menu
Output Filter
Number of Digits
Alarm Options
After Decimal
DP Display Format
Point.
Factory Defaults
(00.000)
Summary of Contents for MicroTrans EQ
Page 2: ......
