MicroTrans
EQ
Operation & Maintenance Manual
Paragon Controls Incorporated
8
Revision Level 012
4. INPUT/OUTPUT SET-UP
The MicroTrans
EQ
has been configured and calibrated at the factory for the specific application. Refer
to the MicroTrans
EQ
Set-Up label located on the left side of unit to verify correct Input/Output
configuration for the application. If input or output configuration changes are required refer to the tables
in the sections below and the figure in Section 3.1.
4.1. PROCESS
OUTPUT
To change the output configuration, set the S2 & S4 switches as follows:
Process Output
Range
S2
S4
Current
4-20mA
NA mA
Voltage
0-10VDC
10V
V
Voltage
0-5VDC
5V
V
4.2.
TEMPERATURE INPUT (OPTION)
To change the input configuration, set the S1 switch as follows:
Temperature Input
S1 Switch Selection
4-20mA mA
0-10VDC V
Summary of Contents for MicroTrans EQ
Page 2: ......
