DCH-4000P-xx series Receivers
- 19 -
W W W . P B I - C H I N A . C O M
- Source Mac Address:
factory-set MAC addresses are guaranteed to be unique. Therefore
you cannot configure the address.
- Multicast IP Addr:
Enter the IP address of the multicast stream for the transport stream
over IP.
-
Multicast UDP Port:
Enter the UDP port number of the TS over IP stream.
- Protocol:
select the protocol for multicast: UDP or RTP.
- Output Smoothing:
set the quality of TS which comes from the TS/IP input.
Auto: the bit rate is variable.
Disable: the unit let the TS pass by.
Fixed Rate: the bitrate is fixed.
- TS Bit Rate:
set the bit rate of the TS comes from the TS/IP input. The setting is only valid
when the output smoothing is configured as Fixed Rate.
8.3 Setting Outputs for DCH-4000P-41S /-41T/-41C/-41S2
Please refer to
paragraph 7.3
for the setting method.
Note that the TS over IP input also could be configured as the source of CI, ASI, ASI2 and
Mux/Filter.
9. Manual for DCH-4000P-42S /-42T/-42C/-42S2
9.1 Menu Structure for DCH-4000P-42S /-42T/-42C/-42S2
Note:
the Input menu differs from DCH-4000P-42S /-42T/-42C/-42S2 models according to the
different type of tuner.
