PBI DCH-4000P, User Manual

Page: 18 / 31

DCH-4000P-xx series Receivers
- 15 -
W W W . P B I - C H I N A . C O M
7.3.4. Setting the ASI1 Output
User can configure the settings of ASI1 in this menu.
- ASI Source:
select the signal source of ASI output: CI De-encrypted, TUNER, ASI Input or
Mux-TS.
- ASI Package Length:
you can configure the package length of ASI output as 188 bytes or
select Bypass.
Note:
the Mux-TS is only valid when the Mux or Filter is enabled and turned on. The Mux-TS
indicates not only the after-multiplexed TS when Mux is enabled, but also the
after-filtered TS when the filter is enabled.
7.3.5. Setting the ASI2/SDI Output
The ASI2/SDI port is user-configured as ASI output or SDI output.
If the port is configured as ASI2, the configuration method is the same as ASI. (Please refer to
the
paragraph 7.3.4.
)
If the port is configured as SDI, there are two parameters which need to be set: Audio PID
and Embed Audios.
- Audio PID:
press the
< > < >-keys
to choose the audio PID from 1~4.
- Embed Audios:
there are 4 options: none, one&two, two, and one.
7.3.6. Setting the Mux/Filter
Note:
the Mux / Filter are alternative.
For Mux
Mux Switch:
the internal multiplexer could be switched On/Off.
Bit Rate:
set the output bit rate of the multiplexed TS in Kbps.
TS ID:
you can configure the TS ID to mark the multiplexed TS.
Program List:
the list of programs multiplexed. Press the
<ENTER>-key
to select the
program which is expected to be multiplexed. A “
*
” will be displayed in the front
of the program name. Press the
<ENTER>-key
again to deselect a program.
For Filter
Filter Switch:
the internal filter could be switched On/Off.
Bit Rate:
set the output bit rate of the filtered TS in Kbps.
Source:
select the source of the TS which is expected to be filtered.
Program List:
the list of programs filtered. Press the
<ENTER>-key
to select the program
which is expected to be filtered away. A “
*
” will be displayed in the front of the
program name. Press the
<ENTER>-key
again to deselect a program.
8. Manual for DCH-4000P-41S /-41T/-41C/-41S2
8.1 Menu Structure for DCH-4000P-41S /-41T/-41C/-41S2
Note:
the Input menu differs from DCH-4000P-41S /-41T/-41C/-41S2 models according to the
type of tuner.