PBI DCH-4000P, User Manual

Page: 17 / 31

DCH-4000P-xx series Receivers
- 14 -
W W W . P B I - C H I N A . C O M
7.3.2 Setting Common Interface
There are 2 submenus: CI Source and Setup which allow you to set or select the parameters
of the CI.
- CI Source:
select Tuner or ASI input to set the signal source of descrambling.
- Setup:
press the
< > or < >-key
to select the program which is expected to be
descrambled, then press the
<ENTER>-key
to choose Slot1, or Slot2, or Bypass.
Press the
<EXIT>-key
after configuration, and the following message will be shown
on the LCD: “Confirm Changed? ENTER=YES, EXIT=NO”. If you want to keep the
changes, press the
<ENTER>-key
.
0-xxxxx
displays the program name, which signal source is ASI.
1-xxxxx
displays the program name, which signal source is TUNER.
2-xxxxx
displays the program name, which signal source is TS/IP (this is invalid for
30 -10S/-11T/-12C/-13S2 series).
3-xxxxx
factory occupied.
7.3.3 Setting the Parameters of Decoder
You can configure the parameters of Video and Audio of the program decoded by decoder.
- Program:
Press the
< > or < >-key
to select the program which is expected to be
decoded. Press the
< >-and < >-key
to choose channel from 0 to 3, then
press the
<ENTER>-key
to confirm.
0-xxxxx
displays the program name, which comes from ASI input.
1-xxxxx
displays the program name, which comes from TUNER input.
2-xxxxx
displays the program name, which comes from TS/IP input (this is
invalid for 30 -10S/-11T/-12C/-13S2 series).
3-xxxxx
displays the program name which comes from the CI.
- Video:
You can configure the video parameters of programs in this submenu. Press the
<ENTER>-key
to confirm and press the
<EXIT>-key
to cancel.
Video Standard:
you can select Auto or SECAM or NTSC or PAL for the
composite video output.
Screen:
select the screen mode: 4:3 Full, 16:9 Full or 4:3 Letterbox.
DVB Subtitle Lang:
select the language of DVB Subtitle.
EBU Subtitle Lang:
select the language of EBU Subtitle.
Subtitle Priority:
configure the priority of Subtitle; choose whether DVB or EBU
should be first.
- Audio:
You can configure the audio settings in the submenu.
Audio Level:
use the
< > < > < > < >-keys
to modify the audio level within
this range: 0~99.
Audio Mode:
select Stereo, Left, Right or Mono for soundtracks.
Audio Language:
select the language of the audio.