DCH-4000P-xx series Receivers
- 24 -
W W W . P B I - C H I N A . C O M
10.3 Login to HDMS
To login on HDMS, a user account and password are needed. Default user account is:
administrator, password is: admin. You can create or delete new accounts. Detailed information
can be found in the
HDMS Reference Guide.
10.4 Add DCH-4000P-xx to HMDS
Ensure the DCH-4000P-xx are well connected with the network over which the PC that
installed the HDMS can access the DCH-4000P-xx. Press the
icon in the top left of the
window in HDMS to and the system will search the DCH-4000P-xx automatically. The units
which are searched will be displayed in the Devices Window in HDMS.
When a new DCH-4000P-xx is added to the remote control network, you can press
to refresh the network. The new added unit will be added into the HDMS automatically. For
other methods for adding one or a group of DCH-4000P-xx, please refer to the
HDMS
Reference Guide.
10.5 DCH-4000P-xx in HDMS
Double click on the device in the Devices Management window to open the console of the
DCH-4000P-xx. The HDMS provides full operation to the DCH-4000P-xx. Parameters are
grouped in three panels:
- The Input Setting
, which gives the full operation on inputs parameters.
- The Output Setting
, allows the full operation control functions on outputs parameters.
- The System Setting
, shows the general device management parameters.
Each console has four control buttons:
- Apply:
to apply the current settings for the unit which is being accessed.
- Refresh:
to obtain the current settings from the unit.
- Load:
to load the pre-settings files to the HDMS, and press “Apply” to apply the pre-settings
for the unit.
- Save:
save the user’s settings as an .xml file.
Remark:
When duplicating the configuration of one device to the other unit(s), you need to
modify the System Setting (such as IP address, gateway, Unit name, etc) manually
after loading the .xml file.
