DCH-4000P-xx series Receivers
- 9 -
W W W . P B I - C H I N A . C O M
6.2.3 Editing the Unit Name
The DCH-4000P-xx allows you to edit the unit name which is displayed on the front panel
LCD. The unit name should not be longer than 20 characters in ASCII format.
6.2.4 Checking the Properties
You are allowed to check the properties information of the device.
- MAC address:
Factory-set MAC address which is guaranteed to be unique. You cannot
configure this address.
- FW Version:
the version of the FPGA software.
- SW Version:
the version of the main software.
6.2.5 Recover Factory Default Settings
All the user configurable parameters will be set to the factory default settings, including IP
address and the unit name. Note that the unit will not be connected with the HDMS remote
management system until the IP is properly configured.
6.2.6 Setting Machine Type
This setting is reserved for factory-setting, and you are not allowed to access this menu.
7. Manual for DCH-4000P-30S /-30T/-30C/-30S2
7.1 Menu Structure for DCH-4000P-30S /-30T/-30C/-30S2
Note:
only the Inputs menu differs from DCH-4000P-30S /-30T/-30C/-30S2 models.
