Paxar Monarch DOS-based Pathfinder Ultra System User Manual Download Page 15

Page: 15 / 210

Getting Started

2-3

Using the Function Keys

The key combinations on the list below make scrolling and navigating easier.

Key Combination Description

f 1

Turns the backlight on the display on or off.

f 2

Sets the print method.

f 3

Select the currency symbol.

f 4

Battery Level Status

f 5

Exit

f 6

Set the supply type.

<Home>

Takes you to the beginning of a list.

NOTE:

If you have 11

formats, pressing

<Home> takes you to format 1.

<End>

Takes you to the end of a list.

NOTE:

If you have 11 formats,

pressing

<End> takes you to format 11.

<PgUp>

Takes you to the beginning of a list on the display. Pressing

<PgUp> again moves one full screen length up.

NOTE:

you see options 3 through 10 on the display, pressing

<PgUp> takes you to option 3.

<PgDn>

Takes you to the end of a list on the display.

Pressing

<PgDn> again moves one full screen length down.

NOTE:

you see options 3 through 10 on the display, pressing

<PgDn> takes you to option 10.

NOTE:

See the Equipment Manual for information about using special

characters.

Summary of Contents for Monarch DOS-based Pathfinder Ultra System


















































































































































































































Search results

Summary of Contents for Monarch DOS-based Pathfinder Ultra System

Reviews:

Brands by name

Popular brands

Paxar Monarch DOS-based Pathfinder Ultra System, User Manual

Search results

Summary of Contents for Monarch DOS-based Pathfinder Ultra System

Reviews:

Brands by name

Popular brands