![background image](http://html1.mh-extra.com/html/patton/1000/1000_getting-started-manual_4020433034.webp)
1 • General Information
SmartNode 1000 and 2000 Series Getting Started Guide
34
SmartNode 2400 description
In addition, two other elements—the Reset button and power input socket—are available on the rear panel of a
SmartNode 2400 as described in
table 12
.
Figure 14. SmartNode PMC interface cards
Console
(RS-232)
RS-232 RJ-45 connector that connects the SmartNode with a serial terminal such as a
PC or workstation with a RS-232 interface, with the following settings:
•
9600 bps, no parity, 8 bit, 1 stop bit, 1 start bit
•
The console port is only used for service and maintenance
Do not plug in an ISDN connection. The voltage on the S-Bus
may permanently damage the console interface.
Table 12. SmartNode 2400 Reset button and power line socket on rear panel
Element
Description
Reset button
The button has three different functions:
•
Manual Restart—
During normal operation pressing and releasing the reset button
will cause a system reboot. The application will be restarted without any change to the
existing SmartWare configuration
.
•
Restoration—
Pressing and holding the reset button for 5 seconds will restore the fac-
tory configuration and automatically reboot the system.
Note
In this case the existing IP SmartWare configuration is lost.
•
Boot loader—
Powering the SmartNode while pressing the reset button for 5 seconds
will cause the factory-fitted boot loader to start in place of the application. The boot
loader uses a minimal set of parameters. In case the application does not start correctly,
the boot loader can be used as a fallback to download a new software version.
100–240 VAC
50/60 Hz
Electricity supply socket for mains power cable.
The mains supply
must be secured with an external fuse or circuit-breaker,
with a maximum tripping current of 16A.
Table 11. SmartNode 2400 port description (Continued)
Port
Description
Summary of Contents for 1000
