Patton 1000, Getting Started Manual

Page: 163 / 181

Identification of the SmartNode devices via SNMP
163
SmartNode 1000 and 2000 Series Getting Started Guide
A • Specifications
T1/E1 daughter card
Hardware Interface (software selectable):
• E1 – RJ48C
• T1 – RJ48C
Indication LEDs
• Link – Indicates securing the T1/E1 signal.
Figure 95. RJ48C pinout
Figure 96. T1/E1 card showing LED and RJ48C
Identification of the SmartNode devices via SNMP
All SmartNode devices have assigned sysObjectID (.iso.org.dod.internet.mgmt.mib-2.system.sysObjectID)
numbers (see table 45).
According to table 45, an SNMP get request to .iso.org.dod.internet.mgmt.mib-2.system.sysObjectID of a Smart-
Node 1200 device reads out a numeric OID of 1.3.6.1.4.1. 1768.2.4.1, which represents a SmartNode 1200
Table 45. SmartNode Models and their Unique sysObjectID
SmartNode Model SysObjectID
SN1200 .iso.org.dod.internet.private.enterprises.patton.products.sn1200
1.3.6.1.4.1.1768.2.4.1
SN1400 .iso.org.dod.internet.private.enterprises.patton.products.sn1400
1.3.6.1.4.1.1768.2.4.2
SN2300 .iso.org.dod.internet.private.enterprises.patton.products.sn2300
1.3.6.1.4.1.1768.2.4.3
SN2400 .iso.org.dod.internet.private.enterprises.patton.products.sn2400
1.3.6.1.4.1.1768.2.4.4
1
2
3
4
5
6
7
8
1
2
3
4
5
6
7
8 (TX) Transmit (Ring)
(TX) Transmit (Tip)
Shield
(RX) Receive (Ring)
(RX) Receive (Tip)
Shield
No connection
No connection
Signal Name RJ-48C Jack
IC-E1V
E1 0 LINK
G.703 balanced