October 2021
43
PWPP HH P1 - Manual
sACN TRANSMIT PRIORITY
When E1.31 sACN or Pathway ssACN is put on the network, it will be tagged with a priority level. At output ports, multiple
sources will HTP levels if their priorities match, otherwise they will arbitrate. The default TX priority per Port is 100. Valid
priorities are between 1 and 200 where 200 is the highest priority possible.
This property is only visible if the above property
sACN Transmit Priority Slot
is set to 0 (disabled)
SIGNAL LOSS
HOLD TIME (s)
If the DMX512 source ceases, the Network DMX will continue to be refreshed to the network using the levels from the last
packet the gateway received until this timer expires.
RDM PROPERTIES
Not applicable to Input Ports.
PATCHING PORTS
For in-depth instructions on patching the ports on your PWPP HH P1, refer to the
Pathscape manual
section titled
DMX
Patch
.
Summary of Contents for Pathport PWPP HH P1 XLR5F
Page 7: ......
