PWPP HH P1 - Manual
October 2021
2
REMOTE DEVICE MANAGEMENT (RDM)
ANSI E1.20 Remote Device Management (RDM) is an industry standard, also published by ESTA, which allows remote
configuration of last-mile DMX devices, using the same wire pair that carries the DMX signal. Like DMX, RDM requires a
separate dedicated controller to generate the signal packets the PWPP HH P1 will route. The free downloadable Pathscape
software is required to use the PWPP HH P1 as an RDM gateway to configure DMX-based equipment.
INSTALLATION INSTRUCTIONS
The PWPP HH P1 is intended for hand held use during configuration of a system, or can be mounted using the included
hanging bracket.
Hanging Bracket (Included)
1/2" Ø Hole
Safety
Attachment Ring
Safety
Attachment Ring
TOP VIEW
REAR VIEW
SIDE VIEW
Hanging Bracket
Hanging Bracket
Mounting Point
Bracket may be
installed in 90
degree increments
Summary of Contents for Pathport PWPP HH P1 XLR5F
Page 7: ......
