October 2021
29
PWPP HH P1 - Manual
SOFTWARE (PATHSCAPE) CONFIGURATION
Wherever possible, we recommend using a PC with Pathscape to configure your PWPP HH P1. For in-depth information on
using Pathscape, see the Pathscape manual. Pathscape is available for macOS and Windows from the Pathway website.
If using a PC with Pathscape is not possible or practical, see the section
Front Panel UI and Menu
later in this manual.
NOTE
some features are not available if using only the Front Panel to configure the device.
NETWORK SETUP
PLEASE NOTE: Before any configuration and network setup can be done, including setting the IP, the PWPP HH
P1 must be added to a Security Domain. If the device is not added to a Security Domain, it will not be possible
to configure any properties.
From the factory, the PWPP HH P1’s IP address is static, and set to
10.X.X.X
(where X is between 0 and 254), with a subnet
mask of
255.0.0.0
and a default gateway of
10.0.0.1
. Before any additional configuration, set the devices’ IP address to the
same subnet and IP range as the computer and other devices on the lighting network.
Additionally, the PWPP HH P1’s default name in the device list will be shown as its IP address. Give it a useful name before
continuing.
Summary of Contents for Pathport PWPP HH P1 XLR5F
Page 7: ......
