October 2021
21
PWPP HH P1 - Manual
RETAINING DEVICE SETTINGS FROM UNKNOWN DOMAINS
In the unlikely event that you don’t know the password of a Security Domain, but you’d like to retain all its configuration, try
the following:
Without logging in to a Domain, all devices that appear with amber padlocks are
read-only
. Save a show file, and the
configuration of all devices is saved. You can then factory default the devices using the prescribed method.
See the Pathway website, under
Support > Reference Articles > Factory Defaulting Ethernet Devices
for detailed
instructions.
Once they reappear in Pathscape as
Ready to Secure
, add them to a Security Domain and log in. Once all devices
appear with a
Green Padlock
, open the show file and
Send All Transactions
to restore the network configuration and
patch.
USING OLDER VERSIONS OF PATHSCAPE WITH NEW DEVICES
If you use Pathscape 1 or Pathscape 2 with devices shipped after
January 1, 2020 (Version 5 firmware or later)
, you will
not be able to configure them.
You must use Pathscape 4 or later
. As a reminder, the device label will appear in the earlier
versions of Pathscape as “
Use latest Pathscape PC software to secure
”. Other properties will be shown and are correct,
but any attempts to change them will fail.
Summary of Contents for Pathport PWPP HH P1 XLR5F
Page 7: ......
