SYSTEM
SMART
®
Heat
Link
43301 Wireless Internet Gateway
Installer/User Manual
Gateway Installation
LOCK
UNLOCK
Step 1
Remove the port cover from the bottom of the Wireless Internet Gateway by twisting it ~¼ turn counter-clockwise.
Step 2
If connecting to the Internet and app, attach the Ethernet network cable to the gateway, then to your router.
Step 3
Plug micro USB into the gateway, then plug the USB into the plug adapter.
Step 4
Plug the adapter into the wall.
Step 5
If desired, mount the port cover to a wall or other surface. Replace the port cover.
Wireless Internet
gateway
USB to
micro USB cable
USB power
adapter
To Internet router
(by others)
Plug into 120V outlet
Multi button
LED light
ring
Ethernet cable
Overview
The Wireless Internet Gateway is the heart of the HeatLink Smart System,
connecting the system devices using the Zigbee HA protocol, and connecting
to the internet via an ethernet cable (included) and router (by others).
The HeatLink
®
Smart System can be configured with an internet connection
(Online), or without (Offline). The free HeatLink
®
App must be downloaded
to your Apple or Android device for use with your Online Smart System.
In order to use the app you must first create a profile. Follow the in app
instructions to set up your profile.
Google Play and the Google Play logo are trademarks of Google LLC.
Apple, the Apple logo, iPhone, and iPod touch are trademarks of Apple Inc., registered in
the U.S. and other countries. App Store is a service mark of Apple Inc., registered in the
U.S. and other countries.
Product Compliance
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following
measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following
two conditions: (1) This device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that may cause undesired
operation.
This device complies with Industry Canada’s licence-exempt RSSs. Operation is subject to
the following two conditions:
(1) This device may not cause interference; and
(2) This device must accept any interference, including interference that may cause
undesired operation of the device.
Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils
radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes :
(1) l’appareil ne doit pas produire de brouillage, et
(2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, même si le
brouillage est susceptible d’en compromettre le fonctionnement.
July 11, 2018
L643301 Wireless Gateway instructions
Specifications
Operating conditions
32 - 104ºF / 0 - 40ºC
10 - 90% humidity (non-
condensing)
Storage
-14 - 140ºF/-10 - 60ºC
Protocols Supported
Zigbee HA1.2 Profile
Wifi 802.11n
RF Freq.
2.4 GHz
RF Range
400m open field
Input voltage
120VAC ±10%, 60Hz
Size
3.5" × 3.5" × 2.2" / 89mm × 89mm
× 56mm
www.heatlink.com
Printed in Canada
HeatLink Group, Inc.
