POLARES 32
37
Errore. Per applicare Heading 1 al testo da visualizzare in questo punto, utilizzare la scheda
Home.
The columns of the measurement table for a session are listed and described below.
•
Meas.: box to select or deselect the measurement corresponding to the line.
•
A or C1: identifier of the logic electrode associated with role A (or C1) for the
specific measurement.
•
B or C2: identifier of the logic electrode associated with role B (or C2) for the
specific measurement.
•
M or P1: indicates the identifier of the logic electrode associated with role M (or
P1) for the specific measurement.
•
N or P2: identifier of the logic electrode associated with role N (or P2) for the
specific measurement.
•
Status: status of the measurement, it can be:
◦
“-” if the measurement has not been performed;
◦
“OK” ff the measurement was performed without errors, whether the Sigma value
is lower than the set threshold or higher; in the latter case the measurement is highlighted
in yellow;
◦
a numerical value that identifies the type of error found during the measurement;
an incorrect measurement is highlighted in red.
F
IGURE
19:
P
ERFORMING THE MEASUREMENTS AND RESULT TABLE FOR
ONE SESSION
