POLARES 32
25
Errore. Per applicare Heading 1 al testo da visualizzare in questo punto, utilizzare la scheda
Home.
to a new template. In this particular case the “last~template” will keep the used and
unsaved template information.
In case variations made on a template can be used in more than one measurement session,
it is recommended to save these settings on a dedicated template.
The operations to be performed when opening a template are as follows:
•
select the desired template from the drop-down menu to the right of the
“Template” button,
•
press “Template”.
The system will load the data contained in the template and present them on the window
for viewing and possible modification by the operator.
Templates display
The display windows of a template are recognisable by their title, which reads
“Template:” followed by the name of each individual page and the name of the template
displayed.
The template parameters are distributed over the following four pages, in the order in
which they are described:
•
Session parameters, described in section 4.2.3;
•
Electrodes, described in section 4.2.4;
•
Measurements, described in section 4.2.5;
•
Electrical parameters, described in section 4.2.6.
The operator can move back and forth across the four template display pages without
restriction.
There are 5 buttons at the bottom of the page, which function as follows:
•
“Back”: allows you to return to the homepage, discarding any changes you may
have made to the four display windows of the template;
•
“<< XXX”: allows you to reach the previous page of the four pages listed above,
instead of XXX you will find the title of the page that can be reached (Session parameters,
Electrodes, Measurements);
•
“>> XXX”: allows you to reach the next page of the four pages listed above,
instead of XXX you will find the title of the page that can be reached (Electrodes,
Measurements, Electrical parameters);
