background image

10

D_FB-D_1FB 5715-669 UK.indd CM

Prop. Directional Control Valve

Series D*FB / D*1FB

Operation Manual

Parker Hannifin GmbH

Hydraulic Controls Division

4. Mounting / Installation

Scope of Supply

Please check immediately after receiving the valve, 
if the content is matching with the specified scope 
of supply. The delivery includes:

• valve
• operation 

manual

The central connector assembly as well as the 
parametrizing cable has to be ordered separately 
and are not included in the delivery.

 

Please check the delivery immediately after 
receiving the shipment for apparent damages 
due to shipping. Report shipment losses at 
once to the carrier, the insurance company 
and the supplier!

Mounting

 

 

 

 

 

•  Compare valve type (located on the name plate) 

with part list resp. circuit diagram.

•  The valve may be mounted fix or movable in 

any direction.

•  Verify the mounting surface for the valve. Une-

veness of 0.01 mm/100 mm, surface finish of 
6.3 μm are tolerable values.

 

Keep clean valve mounting surface and work 
environment!  

 

•  Remove protection plate from the valve moun-

ting surface 

•  Check the proper position of the valve ports 

and the O-rings.

•  Mounting bolts:  

D1FB: 4 pcs. M5x30  
D3FB: 4 pcs. M6x40 
D31FB: 4 pcs. M6x40 
D41FB: 2 pcs. M6x55 / 4 pcs. M10x60  
D91FB: 6 pcs. M12x75 
D111FB: 6 pcs. M20x90  
use property class 12.9, DIN 912

 

Parker offers bolt kits:

 

D1FB: BK375, D3FB: BK385, D31FB: BK385, 
D41FB: BK320, D91FB: BK360, D111FB: 
BK386

•  Tighten the bolts crisscross with the following 

torque values:  
D1FB: 7.6 Nm / D3FB: 13.2 Nm 
D31FB: 13.2 Nm, D41FB: 13 (63) Nm, D91FB: 
108 Nm, D111FB: 517 Nm

 

Insufficient condition of the valve mounting 
surface migth create malfunction! 

 

Incorrect mounting resp. bolt torque may 
result in abrupt leakage of hydraulic fluid on 
the valve ports.

Operation 

Limits 

   

The valve may be operated within the determined 
limits only. Please refer to the “technical data“ sec-
tion as well as to the “characteristic curves“ in the 
catalog. 
 

 

 

 

Follow the environmental conditions! Unallo-
wable temperatures, shock load, aggresive 
chemicals exposure, radiation exposure, 
illegal electromagnetic emissions may result 
in operating trouble and may lead to failure! 
Follow the operating limits listed in the “spe-
cifications“ table!

 

 

 

Pressure Fluids

The following rules applies for the operation with 
various pressure fluids:
 
 

The above information serves for orientation 
and does not substitute user tests among the 
particular operating conditions. Particularly no 
liabiliy for media compatibility may be derived 
out of it.

mineral oil

usable without restriction

HFA

oil-in-water emulsion

consultation required

HFB

water-in-oil emulsion

consultation required

HFC

aqueous solution (glycols)

consultation required

HFD

unhydrous fluids (Phosphor-Ester)

consultation required

 

For detailed information concerning pressure 
fluids note VDMA-document 24317 as well 
as DIN 51524 & 51502. 

 

 

Special gaskets may be available depending 
on the utilized fluid.

 

In case of insecurity please consult the fac-
tory.

14

14

Summary of Contents for DFB Series





























Reviews: