Prop. Directional Control Valve
Series D*FB / D*1FB
Operation Manual
7
D_FB-D_1FB 5715-669 UK.indd CM
Parker Hannifin GmbH
Hydraulic Controls Division
Technical Data
General
Model
Proportional directional control valve, direct operated (D*FB), pilot
operated (D*1FB)
Drive
Proportional solenoid
Mounting Pattern
NG6 (CETOP 3) / NG10 (CETOP 5)
NG16 (CETOP 7) / NG25 (CETOP 8) / NG32 (CETOP 11)
Installation Position
Any
Hysteresis D1FB*0/D3FB*0
[%] <
4
D3FB*3/D*1FB
[%] <
5
Ambient Temperature Range
[°C] -20...+60
Protection Class
NEMA 4 (IP 65) acc. EN 60529
Vibration Strength
[G] 10 Sinus 5...2000 Hz acc. IEC 68-2-6
30 Random noise 20...2000 Hz acc. IEC 68-2-36
15 Shock acc. IEC 68-2-27
Weight
[kg] NG6: 3 / NG10: 7 / NG16: 11 / NG25: 19.5 / NG32: 61
Hydraulic
Fluid Rate
Hydraulic oil acc. DIN 51524...535, other on request
Viscosity
[SSU] 140...370
Fluid Temperature
[°C] -20...+60
Cleanliness
Purity level class acc. NAS 1638: class 7
Operating Pressure max. (D*FB)
Pilot oil intern (D*1FB):
Pilot oil extern (D*1FB):
[bar]
[bar]
[bar]
350 for ports P, A, B / 210 for port T
350 for ports P, A, B, X / 185 for T, Y
350 for ports P, A, B, T, X / 185 for Y
Electrical
Duty Ratio
% 100
Supply Voltage
Us
VDC 18...30, ripple < 5% eff., surge free
Current Consumption max.
A D1FB: 1.5 / D3FB: 2.0 / D*1FB: 1.5
Pre-Fusing
A D1FB: 2.0 / D3FB: 2.5 / D*1FB: 2.0
Potentiometer supply
Up
V ± 10 / ± 5 % max. 10 mA
Command Signal Options
Uc
Ic
V
mA
mA
Codes F0, M0, W5: +10...0...-10, ripple < 0.01 % eff., surge free,
Ri = 100 kOhm
Codes S0 & W5: 4...12...20, ripple < 0.01 % eff., surge free,
Ri = 200 Ohm
< 3.6 mA = enable off, > 3.8 mA = enable on (acc. NAMUR NE43)
Code G0: +20...0...-20, ripple < 0.01 % eff., surge free,
Ri = 200 Ohm
Differential Input Voltage max.
V Codes F0, M0, S0, G0: 30 for terminal D and E against PE (terminal G)
V 11 for terminal D and E against 0V (terminal B)
V Code W5: 30 for terminal 4 and 5 against PE (terminal PE)
V 11 for terminal 4 and 5 against 0V (terminal 2)
Channel Recall Signal
Uch
V 0...2.5: Off / 5...30: On / Ri = 100 kOhm
Adjustment Ranges
Min
% 0...50
Max
% 50...100
Ramp
s 0...32.5
Interface
RS 232C, parametrizing connection 5pole
EMC
EN 61000-6-2, EN 61000-6-4
Central Connection
Codes F0, M0, S0, G0: 6 + PE acc. EN 175201-804
Code W5: 11 + PE acc. EN 175201-804
Cable Specification
mm² Codes F0, M0, S0, G0: 7 x 1.0 (AWG16) overall braid shield
mm² Code W5: 11 x 1.0 (AWG16) overall braid shield
Cable Length max.
m 50
11
11
