Prop. Directional Control Valve
Series D*FB / D*1FB
Operation Manual
19
D_FB-D_1FB 5715-669 UK.indd CM
Parker Hannifin GmbH
Hydraulic Controls Division
Parametrizing connection
Parametrizing cable 40982923
The cover plug has to be re-installed after
completion of the parametrizing work.
Program installation
Please check before installation if the above hard-
ware requirements are met. If your PC has already
stored an older version of the “ProPxD” program,
it has to be deinstalled by using the Windows
®
-
system control feature.
Program installation sequence:
• terminate the execution of other programs
• insert ProPxD-software CD
• execute the file “setup.exe”
• follow the instructions on the screen
Answer the question, if an older version should be
overwritten, with “ok”. During the installation you
may change destination drive resp. installation
path, if needed (i.e. if the storage space on drive
“c” is not sufficient).
Please answer also “ok” if at the end of the installation
the program reports any system information. After
successful installation the desktop display shows
the ProPxD icon for starting the program.
Software Operating
Brief instruction for first startup:
•
Connect the valve electronic to the supply voltage.
• Connect the valve electronic to a PC via the
parametrizing cable.
• Click on the ProPxD icon to start the operating
program.
• After displaying the program resp. data base
version a program window opens and the con-
nected valve will be automatically identified
(possibly a manual identification via the button
“Receive all” is necessary).
• Select the desired version via the menu “Op-
tions/Optionen” with the menu item “Language/
Sprache”.
•
The valve specific default parameters are already
available within the parameter table.
• Individual parameters may be selected via
mouse or the arrow buttons at the center of the
program screen.
23
23
