Certification for the Drive
10-4
650G AC Drive
Certificates
650G
0.25
-
4.0
K
W
230V
EC
D
ECLARATIONS OF
C
ONFORMITY
Date CE marked first applied: 26/07/2001
Issued for
EMC Directive
Low Voltage Directive
The drive is CE
compliance
with the EMC
Directive when
the unit is used
as
relevant
apparatus
.
In accordance with the EEC Directive
2004/108/EC
We Parker Hannifin Manufacturing Ltd.,
address as below, declare under our sole
responsibility that the above Electronic
Products when installed and operated with
reference to the instructions in the Product
Manual (provided with each piece of
equipment) is in accordance with the relevant
clauses from the following standard:-
BSEN61800-3 (2004)
In accordance with the EEC Directive
2006/95/EC
We Parker Hannifin Manufacturing Ltd,
address as below, declare under our sole
responsibility that the above Electronic
Products when installed and operated with
reference to the instructions in the Product
Manual (provided with each piece of
equipment), is in accordance with the following
standard :-
EN61800-5 (2007)
marked in
accordance with
the low voltage
directive for
electrical
equipment and
appliances in the
voltage range
when installed
correctly.
M
ANUFACTURERS
D
ECLARATIONS
This is
EMC Declaration
Machinery Directive
Since the
provided to aid
your
justification for
EMC
compliance
when the unit
is used as a
component.
We Parker Hannifin Manufacturing Ltd,
address as below, declare under our sole
responsibility that the above Electronic
Products when installed and operated with
reference to the instructions in the Product
Manual (provided with each piece of
equipment) is in accordance with the relevant
clauses from the following standard:-
BSEN61800-3 (2004)
The above Electronic Products are components
to be incorporated into machinery and may not
be operated alone.
The complete machinery or installation using
this equipment may only be put into service
when the safety considerations of the Directive
2006/42/EC are fully adhered to.
Particular reference should be made to
EN60204-1 (Safety of Machinery - Electrical
Equipment of Machines).
All instructions, warnings and safety
information of the Product Manual must be
adhered to.
potential hazards
are mainly
electrical rather
than mechanical,
the drive does not
fall under the
machinery
directive.
However, we do
supply a
manufacturer's
declaration for
when the drive is
used(as a
component) in
machinery.
Dr Martin Payn (
Conformance Officer)
Parker Hannifin Manufacturing Ltd., Automation Group, SSD Drives Europe
NEW COURTWICK LANE, LITTLEHAMPTON, WEST SUSSEX BN17 7RZ
TELEPHONE: +44(0)1903 737000 FAX: +44(0)1903 737100
Registered Number: 4806503 England. Registered Office: 55 Maylands Avenue, Hemel Hempstead, Herts HP2 4SJ
